Home Products Brochures Perkins Parts Dealers Help Desk

| Photo Gallery |Mobile Generator Sets

Generator trailer 1Taylor Power Systems custom built trailers are vehicles specially designed and built for transporting Taylor Power Systems generator sets with maximum safety at highway speeds. These mobile generators from 20 to 500kW are powered by mobile EPA certified engines. These are complete ready to run generator sets with DOT rated integral tank trailers. Standard equipment includes a heavy-duty weather enclosure with hinged doors, critical grade exhaust silencer, battery, oil, anti-freeze, and full output circuit breaker. The standard analog control panel provides full instrumentation with voltmeter, frequency meter, percent of load meter, oil pressure gauge, hour meter, coolant temperature gauge, fuel level gauge, and battery voltmeter. The controller also provides a safety shutdown system.

Generator trailer 2All trailers come equipped with a fuel tank built into the trailer, electric brakes with safety disconnect and 7 wire connector, torsion axle(s), front tongue jack, two rear stabilizer jacks, ICC lighting, and license plate bracket. These trailers also come with a lockable storage trunk at the front of the trailer.




MODEL NUMBER KW RATING ENGINE MODEL GENERATOR MODEL TANK CAPACITY TRAILER CAPACITY
TM20 20 Perkins 404D-22G BCI184E 75 gals. 3500 lb.
TM28 28 Perkins 404D-22TG BCI184G 125 gals. 3500 lb.
TM30 30 Perkins 404D-22TAG BCI184H 125 gals. 3500 lb.
TM55 55 Perkins 1104D-44TG1 UCI224E 150 gals. 5000 lb.
TM60 60 Perkins 1104D-E44TG1 UCI224F 150 gals. 5000 lb.
TM80 80 Perkins 1104D-E44TAG1 UCI274C 150 gals. 7000 lb.
TM100 100 Perkins 1104D-E44TAG2 UCI274D 150 gals. 7000 lb.
TM125 125 Perkins 1106D-E66TAG2 UCI274E 200 gals. 10000 lb.
TM140 140 Perkins 1106D-E66TAG2 UCI274F 200 gals. 10000 lb.
TM150 150 Perkins 1106D-E66TAG3 UCI274G 200 gals. 10000 lb.
TM175 175 Perkins 1106D-E66TAG4 UCI274H 200 gals. 10000 lb.
TM200 200 Cummins QSB7 G5 UCI274J 200 gals. 12000 lb.
TM250 250 Iveco Cursor87 TE1D HCI434D 200 gals. 12000 lb.
TM350 350 Perkins 2206D-E13TAG2 HCI434F 500 gals. 18000 lb.
TM400 400 Perkins 2206D-E13TAG3 HCI534C 500 gals. 18000 lb.
TM450 450 Perkins 2506D-E15TAG1 HCI534D 500 gals. 18000 lb.
TM500 500 Perkins 2506C-E15TAG3 HCI534E 500 gals. 18000 lb.

Optional Equipment:

  • Sound Attenuated Enclosure
  • Multi-Voltage Selector Switch
  • Dual Voltage Generator
  • Output Power Cable
  • Block Heater
  • Battery Charger
  • PMG Exciter (not available on the TM20)
  • Isochronous Governor TM30 through TM60
Note: Isochronous Governor is standard on the TM80 through TM500 (not available on the TM20)

Visit Northern Tool + Equipment

| Site Map | Terms of Use | Contact Us |
Copyright © 2011 Taylor Power Systems, Inc.
Taylor Power is a proud member of " The Taylor Group of Companies"
All trademarks and registered trademarks are the property of their respective owners.